Outdoor courts
We quote modular outdoor court tiles for backyard pickleball courts, HOA courts, and multi-sport basketball/pickleball pads. This is a quote-led page, not a $29 tile checkout.
The 2026 USA Pickleball Official Rulebook (Rule 3.A) sets the court at 20×44 ft (880 sq ft). The minimum playing surface is 30×60 ft (1,800 sq ft). For new construction and tournament play, the book recommends 34×64 ft (2,176 sq ft). Lines are 2 inches wide and clearly contrasting. The rulebook does not require a particular surface material, and it does not publish an “approved flooring” list. Approved lists in the rulebook are for balls and paddles.
A common tighter backyard kit is 26×52 ft (1,352 sq ft). That leaves less runoff than the 30×60 minimum. We will quote the footprint you actually have, not a size we wish you had.
| Footprint | Area / 12×12 tiles | Typical use |
|---|---|---|
| 20×44 ft | 880 | The court itself, with no runoff. Not a comfortable standalone pad. |
| 26×52 ft | 1,352 | Compact backyard kit. |
| 30×60 ft | 1,800 | Official minimum playing surface. |
| 34×64 ft | 2,176 | Recommended for new construction and tournament play. |
The product we quote for outdoor courts is a modular 12×12 sport tile over a hard, sloped base — typically a concrete slab. Water drains through the tile to the slab. Damaged tiles can be replaced one at a time. In Texas heat, tiles expand. Installations need the manufacturer’s expansion gap and should not be tight to a fence or goal post.
A 2021 supplier note, which we will reconfirm before we quote a court: Versatiles were not recommended for outside use; 12×12 sport tiles would work. Court lines are a quote item. Temporary tape is a poor stand-in for painted or inlaid lines, and duct tape does not belong on a finished gym floor.
Acrylic coatings over concrete or asphalt are common on public courts. They are contractor-applied, not a mail-order kit, so we treat acrylic as a conversation and a possible referral — not the first thing we ship.
Sport Court® is a trademark of another company. We are not that brand, and we do not claim any tile is “USA Pickleball approved.”
A court is more than tiles. The slab, site work, net, fence, and freight often cost as much as or more than the surface. Figures below were gathered November 16, 2026, from public kit pages and published cost guides. They are not Texas Court Flooring prices. Freight is usually extra.
| Item | Observed range | Source notes |
|---|---|---|
| Public 12×12-style kit, 30×60 ft | About $9,759–$13,499 before freight (about $5.42–$7.50/sq ft, arithmetic) | Public kit listings, November 16, 2026 |
| Compact 26×52 ft kit | Listed from about $7,389 | Same research pass |
| Concrete pad | About $4–$10/sq ft, often excluding site prep; one guide put a 30×60 pad at $9,000–$18,000 | VersaCourt (pad, excluding site prep); HomeGuide, January 6, 2026 |
| Full new 30×60 court (site, slab, surface, lines) | Commonly cited $20,000–$50,000 nationally; HomeGuide average $34,000 | HomeGuide, January 6, 2026. A San Antonio dealer page updated December 28, 2025 quoted about $30,000–$35,000 for an acrylic entry and $40,000–$45,000 with a branded tile surface, turnkey-style. |
If you already have a sound, sloped slab, you may only need the surface, edges, lines, and net. If you do not, budget the pad first. DIY snap-together over an existing slab is realistic for a smaller court; a 30×60 or larger job is heavier work.